ADQ36006101-S Refrigerator Water Filters
Learn More About The ADQ36006101-S Filter
How To Install The ADQ36006101 Filter:
- Press the push button to open the filter cover
- Pull the old cartridge downward to remove and discard
- With new cartridge in the horizontal position, push the the cartridge into the manifold hold until it stops
- Push it up in firmly until you cannot push up further
- Push the filter cover until it clicks into place
- After replacing flush 2.5 gallons of water through filter before use
Marvel at the specifications of our ADQ36006101 compatible filters.
|Change Frequency||6 Months||6 Months||6 Months|
|Filtering Capacity||200 Gallons||200 Gallons||200 Gallons|
|Contaminents Filtered||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates|
|NSF Rating||-||-||42, 53|
|Flow Rate||.5 GPM||.5 GPM||0.5 GPM|
|Pressure Range||25-125 PSI||25-125 PSI||25-125 PSI|
|Operating Temperature||33-100 °F||33-100 °F||33-100 °F|
The factory original LG LT700P and the compatible aftermarket EcoAqua filter both reduce contaminants found in your water supply, including dirt, chlorine, chemicals, and minerals.
The LG LT700P has NSF ratings of 42 and 53, meaning it has been certified to reduce multiple contaminants in tap water.
The EcoAqua EFF-6032A has many of the same attributes as the OEM. The filtering capacity, flow rate, pressure range, and operating temperature is the same as the OEM's.
The primary difference between the OEM and aftermarket filter is price and NSF Standard certifications, though some filters that are not NSF rated are still constructed from NSF rated parts.
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF Ratings
Some filters that are not NSF rated are still constructed from NSF rated components.
Save Your Furnace Tip #2:
When selecting an air filter, take time to measure the exact dimensions and compare them with the exact dimensions listed on our site.