Replacement Refrigerator Filters for MIWF8200
Product Description
The MIWF8200 filter is a newcomer to the US market and fits in french door refrigerators from Midea, Sharp, and others. The MIWF8200 creates better tasting water for drinking and making beverages as well as clean, clearer, healthy ice.
Installation
1). Locate the old filter: Open your refrigerator doors and find the water filter housing. It is usually in the upper right-hand corner of the fresh food compartment.
Remove the old filter: Grab the filter and gently turn it counter-clockwise (to the left) until it releases. Pull it straight down and discard it.
Note: Have a small towel nearby, as a few drops of water may spill out.
2). Install the new filter: Align the head of the new filter into the slot. Push it up into the holder and gently turn it clockwise (to the right) until it stops and locks into place. Do not over-tighten it.
3). Flush the system: Place a large pitcher under the water dispenser. Run and discard about 1.5 to 2 gallons of water through the new filter to remove any trapped air or loose carbon particles. Reset the filter light: If your refrigerator has a filter-change indicator light on the control panel, press and hold the Water Filter button (or the corresponding reset button) for about 3 seconds to reset it.
Cross-Compatibility
The filters below are 100% compatible with part number MIWF8200
5 compatible alternative filter models below.
MF-2812-R4
MF-2812-R4R
MIWF8200
PCL-21
SJWF300
Product Comparison
Marvel at the specifications of our MIWF8200 compatible filters.
6 Months
200 Gallons
Chlorine, Taste, Odor
-
.5 GPM
30-125 PSI
34-100 °F
6 Months
300 Gallons
Chlorine, Taste, Odor
NSF/ANSI 42, 53
.5 GPM
30-125 PSI
34-100 °F
The DiscountFilters.com Difference
-
Fast Shipping
(Same Day for most orders placed before 2pm)
-
Free Returns For 1 Year
-
100% Compatibility
Guarantee
-
Made With Care in
Indiana USA
NSF/ANSI Ratings
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF/ANSI Ratings
Some filters that are not NSF/ANSI rated are still constructed from NSF/ANSI rated components.
