Midea MIWF8200 Refrigerator Water Filter, 3-Pack
Compatibility guarantee — Wrong fit or not happy - we'll make it right, up to a whole year
FITS THESE REFRIGERATOR BRANDS
Midea · SHARP
REPLACES THESE FILTER PART NUMBERS
MIWF8200
WHAT YOU GET
- Advanced activated carbon - Reduces chlorine taste & odor
WHAT YOU GET
- Change every 6 months - Swap on schedule for best performance
- Advanced activated carbon - Reduces chlorine taste & odor
POPULAR PART NUMBERS
Replaces these OEM & aftermarket part numbers
- MIWF8200
- MF-2812-R4
- PCL-21
- SJWF300
- MF-2812-R4R
Filter Description
The MIWF8200 filter is a newcomer to the US market and fits in french door refrigerators from Midea, Sharp, and others. The MIWF8200 creates better tasting water for drinking and making beverages as well as clean, clearer, healthy ice.
Features:
Factory original filter from Midea
Fits models MRF29D3AST/ MRF29D6AST/ MRF29D9BST
Easy installation and operation
Rated capacity of 200 gallons
Helps reduce chlorine taste and odor and lead
Helps reduce contaminants found in tap water and improves its quality
Tested and certified by NSF International against NSF / ANSI Standard 42 for reduction of chlorine taste and odor and class I particulates
Tested and certified by NSF International against NSF / ANSI Standard 43 for reduction of lead
Dimensions - 12-1/2" H X 2-3/4" Diameter
$156.99
Pack Size
Orders over $70 ship free. $5.99 otherwise.
Installation Instructions
1). Locate the old filter: Open your refrigerator doors and find the water filter housing. It is usually in the upper right-hand corner of the fresh food compartment.
Remove the old filter: Grab the filter and gently turn it counter-clockwise (to the left) until it releases. Pull it straight down and discard it.
Note: Have a small towel nearby, as a few drops of water may spill out.
2). Install the new filter: Align the head of the new filter into the slot. Push it up into the holder and gently turn it clockwise (to the right) until it stops and locks into place. Do not over-tighten it.
3). Flush the system: Place a large pitcher under the water dispenser. Run and discard about 1.5 to 2 gallons of water through the new filter to remove any trapped air or loose carbon particles. Reset the filter light: If your refrigerator has a filter-change indicator light on the control panel, press and hold the Water Filter button (or the corresponding reset button) for about 3 seconds to reset it.
Compatibility guarantee
Wrong fit, leak, or just doesn’t work? We’ll send the right one. Free return shipping for all orders.
365-day satisfaction
Not happy? Send it back any time in the first year — we’ll make it right. Yes, even an open pack you’ve been running for months.
No-hassle returns
No restocking fees, no return-merch authorization mazes — just start a return and our helpful Customer Experience team will assist.
COMPATIBLE PART NUMBERS
Search by part number or appliance model
Enter your filter part number or appliance model number to verify compatibility.
| Model or Part Number | Type |
|---|---|
| Midea CFDR286M4S | Refrigerator |
| Midea MRF27I6BST | Refrigerator |
| Midea MRF29D2AST | Refrigerator |
| Midea MRF29D3AST | Refrigerator |
| Midea MRF29D6AST | Refrigerator |
| Midea MRF29D9BST | Refrigerator |
| Midea MRF32I6BST | Refrigerator |
| SHARP SJF2955KS | Refrigerator |
| MF-2812-R4 | Filter |
| MF-2812-R4R | Filter |
| MIWF8200 | Filter |
| PCL-21 | Filter |
| SJWF300 | Filter |
Carbon Filtration
Activated Block Carbon Technology
The uses activated block carbon technology. Carbon is one of the most adsorptive substances, and its numerous and microscopic pores make it capable of adsorbing many microscopic contaminants. Adsorption is a chemical bond between the surface of the carbon and a molecule (contaminant).
- Activated carbon is a carbonaceous, highly porous adsorptive medium that has a complex structure composed primarily of carbon atoms. The networks of pores in activated carbons are channels created within a rigid skeleton of disordered layers of carbon atoms, linked together by chemical bonds, stacked unevenly, creating a highly porous structure between the carbon layers. Activated carbon is able to attract and capture a whole host of contaminants, including chlorine and other organic chemical compounds.
- Activated carbon means that the carbon has been treated at 1000°C with steam molecules to selectively burn holes into the carbonized raw material, creating a multitude of pores inside the carbonaceous matrix. This process creates so much surface area that a teaspoon of activated carbon has roughly the same surface area as a soccer field!
- Activated block carbon, then, with its use of adsorption, is one of the most effective water filtration methods in use today.
Replaces These Filter
Midea
