SGF-LB60 Refrigerator Water Filters
Learn More About The SGF-LB60 Filter
How To Install The 5231JA2006B Filter:
- Remove old filter cartridge by grasping and turning counter clockwise about 1/4 turn - discard
- Push new filter into the filter head until it stops
- Turn the new filter 1/4 turn clockwise until it stops
- Flush new cartridge by dispensing water for about 5 minutes
- Replace cartridge once every 6 months
- Press and hold reset water filter button if your fridge has one
Marvel at the specifications of our 5231JA2006B compatible filters.
|Change Frequency||6 Months||6 Months|
|Filtering Capacity||300 Gallons||300 Gallons|
|Contaminents Filtered||Chlorine, Taste, Odor||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates|
|NSF Rating||-||42, 53|
|Flow Rate||.5 GPM||0.5 GPM|
|Pressure Range||20-120 PSI||30-120 PSI|
|Operating Temperature||33-100 °F||33-100 °F|
Want clean and healthy water? Well, look now further. The factory original LG 5231JA2006B filter is just what you need. This filter rids your water of unwanted contaminants and impurities that you don't want to drink. The LG replacement filter has been scrutinously tested and certified by the NSF to meet Standard 42 and Standard 53. This means that the filter has been certified to reduce chlorine and remove other impurities from your water. The LG replacement filter has a pressure range of 30-120 PSI and a temperature range of 33-100 degrees. Once easily installed into your fridge, this filter will produce fresh water at a rate of half a gallon per minute and can filter up to 300 gallons of water before needing to be replaced, which is about every six months. The OEM LG replacement is a great replacement that can fit into many refrigerators by LG, Kenmore, and other refrigerator brands.
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF Ratings
Some filters that are not NSF rated are still constructed from NSF rated components.
Save Your Furnace Tip #10:
Turn off your furnace / air conditioner fan during filter changes.