Replacement for Midea® MIWF6200 Refrigerator Water Filter, 2-Pack
Compatibility guarantee — Wrong fit or not happy - we'll make it right, up to a whole year
FITS THESE REFRIGERATOR BRANDS
Midea · SHARP · Thor · Zline
REPLACES THESE FILTER PART NUMBERS
MIWF6200
WHAT YOU GET
- Advanced activated carbon - Reduces chlorine taste & odor
- Engineered to OEM standards - Same fit, same flow
WHAT YOU GET
- Change every 6 months - Swap on schedule for best performance
- Advanced activated carbon - Reduces chlorine taste & odor
- Engineered to OEM standards - Same fit, same flow
POPULAR PART NUMBERS
Replaces these OEM & aftermarket part numbers
- MIWF6200
Filter Description
Aftermarket replacement for Midea MIWF6200 Refrigerator Water Filter
- Aftermarket compatible replacement for Midea MIWF6200 refrigerator water filter
- Economic alternative to factory original filter
- Easy installation and operation
- Rated capacity of 200 gallons
- Helps reduce chlorine taste and odor and lead
- Helps reduce contaminants found in tap water and improves its quality
- Dimensions - 8" H X 2-1/8" Diameter
All product names, logos, brands, trademarks and registered trademarks are property of their respective owners. All company, product and service names used on this page are for identification purposes only. DiscountFilters.com and National Trade Supply, LLC are not affiliated with these brands.
$47.99
Pack Size
Orders over $70 ship free.
Installation Instructions
1. Remove the Old Filter
Locate the filter: Find the filter housing, which is usually located in the upper right or left corner of your refrigerator's interior.
Twist the filter: Turn the old MIWF6200 filter counter-clockwise (to the left).
Pull it out: Gently pull the old filter straight down or out to remove it.
2. Install the New Filter
Align the tabs: Line up the tabs on the top of the filter with the slots inside the fridge opening.
Twist to lock: Push the filter upward into the opening and turn it clockwise (to the right) until it stops and locks into place.
Close the cover: Close the filter cover.
3. Flush the System
Run the dispenser: Place a large pitcher or cup under the water dispenser.
Flush the line: Run approximately 1 to 2 gallons of water through the new filter. This pushes trapped air and loose carbon dust out of the new lines. The water may look cloudy at first, which is normal.
Compatibility guarantee
Wrong fit, leak, or just doesn’t work? We’ll send the right one. Free return shipping for all orders.
365-day satisfaction
Not happy? Send it back any time in the first year — we’ll make it right. Yes, even an open pack you’ve been running for months.
No-hassle returns
No restocking fees, no return-merch authorization mazes — just start a return and our helpful Customer Experience team will assist.
COMPATIBLE PART NUMBERS
Search by part number or refrigerator model
Enter your filter part number or refrigerator model number to verify compatibility.
| Model or Part Number | Type |
|---|---|
| Midea 810040943348 | Refrigerator |
| Midea FD216SS | Refrigerator |
| Midea MRQ22D7AST | Refrigerator |
| Midea MRS26D5AST | Refrigerator |
| Midea MRS26D7AST | Refrigerator |
| Midea OVERSKADLIG | Refrigerator |
| Midea RQ22D7AST | Refrigerator |
| Midea SBS263SS | Refrigerator |
| Midea SBS263W | Refrigerator |
| SHARP SJG2254FS | Refrigerator |
| SHARP SJWF200 | Refrigerator |
| Thor TRF3601FD | Refrigerator |
| Thor WF200 | Refrigerator |
| Zline RFM-W-36 | Refrigerator |
| Zline RFMW36 | Refrigerator |
| EFF-6056A | Filter |
| MF-2008-R2 | Filter |
| MIWF6200 | Filter |
| MIWFT2100 | Filter |
| MR-097 | Filter |
| NS-WF26SS0-1 | Filter |
| OHRF07 | Filter |
| PCL-20 | Filter |
| WF200 | Filter |
Carbon Filtration
Activated Block Carbon Technology
The uses activated block carbon technology. Carbon is one of the most adsorptive substances, and its numerous and microscopic pores make it capable of adsorbing many microscopic contaminants. Adsorption is a chemical bond between the surface of the carbon and a molecule (contaminant).
- Activated carbon is a carbonaceous, highly porous adsorptive medium that has a complex structure composed primarily of carbon atoms. The networks of pores in activated carbons are channels created within a rigid skeleton of disordered layers of carbon atoms, linked together by chemical bonds, stacked unevenly, creating a highly porous structure between the carbon layers. Activated carbon is able to attract and capture a whole host of contaminants, including chlorine and other organic chemical compounds.
- Activated carbon means that the carbon has been treated at 1000°C with steam molecules to selectively burn holes into the carbonized raw material, creating a multitude of pores inside the carbonaceous matrix. This process creates so much surface area that a teaspoon of activated carbon has roughly the same surface area as a soccer field!
- Activated block carbon, then, with its use of adsorption, is one of the most effective water filtration methods in use today.
