Exact Match DPE14X30X1 | Our#: 172459

Dynamic Equivalent Air Cleaner Refills - 14" x 30" x 1" - 3 Pack

Exact Match DPE14X30X1 | Our#: 172459

  •  Fast Shipping & Free Returns
  •  100% Compatibility Guarantee

Dynamic Air Cleaner Refils - 14" x 30" x 1" - 3 Pack

  • Change Every 6 Months
  • 12½x27⅜x1" Actual
  • Original Manufacturer Part

5 people in your area recently purchased this product!

  •  Fast Shipping & Free Returns
  •  100% Compatibility Guarantee
Frequently Purchased Together

Product Details

Dynamic Air Cleaner Refils - 14" x 30" x 1" - 3 Pack

(actual pad size - 12.5" X 27.375")

Non-OEM refills for Dynamic 1" Polarized-Media Electronic Air Cleaners - NOTE: these refills are not manufactured by Dynamic.

Dynamic® Air Cleaners make your home cleaner, healthier, and safer by:
Turning your home's central heating and cooling system into a high efficiency air cleaning system.
Removing sub-micron particles and other contaminants that other filters miss, including bacteria, odors and smoke.
Removing allergens such as pollen, mold spores and dust mite pellets.
Capturing over 97% of particles .3 microns in size. keeping your entire home cleaner.

Dynamic® Air Cleaners install into existing filter tracks in the air handler or return air grilles which eliminates the need for costly ductwork modifications. The 24V air cleaner connects to R and C terminals on most furnace control boards or plugs directly into a standard household wall outlet using an optional plug-in transformer.

To replace the Dynamic Media Pad:
1) Switch the thermostat to the "off" position and turn off the power to furnace/air handler
2) Open the filter access door or panel
3) Unplug the adapter cord from the air cleaner
4) Remove the air cleaner.  If dust has accumulated on the outer screens of the air cleaner, brush or vacuum to clean
5) Carefully open the air cleaner and remove the old media pad and discard into a garbage bag
6) Position the new media pad - the pad should lay flat and be centered within the frame.  Use only genuine Dynamic replacement media pads. Other filter material will not work with your Dynamic Air Cleaner and will void the warranty
7) Close the air cleaner and plug the adaptor cord into the air cleaner powerhead
8) Re-install the air cleaner into the air handler and restore the power to the air cleaner


Replaces These Refill Pads:

National Filter Sales:
12.5x27.375x1

Additional Information




How to change your furnace/air-conditioner/HVAC air filter

Estimated time: 10 minutes or less

Steps

  1. Determine the location of your filter

    Your forced air system will be similar, whether or not it is a heating (furnace) or cooling (AC) system – or both. The furnace filter housing/slot is located right next to the heating/cooling system’s air handler or blower. Your filter(s) may also be located in a return grille on the wall or ceiling of your home.

  2. Determine the type/size of filter that you use

    Typically, the dimensions or part number of the filter will be printed on the filter frame. Use this information to order a new filter.

  3. Purchase a new air filter from DiscountFilters.com

    Visit DiscountFilters.com and purchase a new filter. Use our filter finders to verify the correct match.

  4. Remove the old filter

    Turn off the power to the heating/cooling system and remove the old filter from its housing/slot and discard.

  5. Insert the new filter

    Pay attention to any airflow direction arrows printed on the frame of the new filter. Install the filter by sliding it into the filter housing/slot with the airflow arrow pointing towards the blower. If installing the filter in a wall or ceiling grille – the airflow arrow should point towards the wall or ceiling. Turn on the power to the forced air system.

    Enjoy cleaner air!