AIRx 21.5x27.5x5HW-HEALTH | Our#: 178443

21.5x27.5x5 AIRx HEALTH Honeywell FC100A1045 Replacement Air Filter - MERV 13

AIRx 21.5x27.5x5HW-HEALTH | Our#: 178443

  •  Free Shipping & Free Returns
  •  100% Compatibility Guarantee

Protect more sensitive lungs

  • Highest rated filter to reduce most pollutants
  • Reduces pollen, dust, lint, dust mite debris, pet dander & mold spores
  • Lessens odors from car fumes & smoke
  • Removes bacteria & virus carriers
  • Creates cleaner indoor air
  • Actual Dimensions: 21 ¼" x 27 ¼" x 4 ⅜"
  •  Free Shipping & Free Returns
  •  100% Compatibility Guarantee
Frequently Purchased Together

Product Details

21.5x27.5x5 AIRx HEALTH Honeywell FC100A1045 Replacement Air Filter - MERV 13

In affordable alternative to the factory original filters, these high quality filters capture and hold pollutants inside the filter, allowing clean air to flow freely through the system.

FEATURES:

  • Aftermarket product, designed to replace the original FC100A1045
  • Moisture resistant frame remains sturdy even in high humidity
  • Rust resistant galvanized wire downstream gives the filter rigidity and holds media in place after installation
  • Built-in support fingers hold pleats in place and allow for maximum dust holding
  • For optimum system performance, replace the filter every six months
  • MERV 13 rating means the filter attracts common large household allergens like dust, pollen, and mold spores as well as smaller particulate like smoke, bacteria, and pet dander
  • Meets LEED standards for green building

Fits Honeywell Series:

  • F27F

Replaces:

  • 207583

Do you want to know about the technical specs?

Nominal Dimensions
21 ½ x 27 ½ x 5"
Actual Dimensions
21 ¼ x 27 ¼ x 4 ⅜"
Filter Media
Electrostatically charged 100% synthetic gradient media that does not support microbiological growth
Filter Support Grid
30 gauge galvanized expanded metal grid
Frame
Moisture resistant double-wall beverage board
Max Temperature
180F (82C) continuous service, peak 225F (107C)
Max Humidity
Resistant to 100% R.H.

Replaces These Filters:

National Filter Sales:
21.5x27.5x4
21.5x27.5x5


How to change your furnace/air-conditioner/HVAC air filter

Estimated time: 10 minutes or less

Steps

  1. Determine the location of your filter

    Your forced air system will be similar, whether or not it is a heating (furnace) or cooling (AC) system – or both. The furnace filter housing/slot is located right next to the heating/cooling system’s air handler or blower. Your filter(s) may also be located in a return grille on the wall or ceiling of your home.

  2. Determine the type/size of filter that you use

    Typically, the dimensions or part number of the filter will be printed on the filter frame. Use this information to order a new filter.

  3. Purchase a new air filter from DiscountFilters.com

    Visit DiscountFilters.com and purchase a new filter. Use our filter finders to verify the correct match.

  4. Remove the old filter

    Turn off the power to the heating/cooling system and remove the old filter from its housing/slot and discard.

  5. Insert the new filter

    Pay attention to any airflow direction arrows printed on the frame of the new filter. Install the filter by sliding it into the filter housing/slot with the airflow arrow pointing towards the blower. If installing the filter in a wall or ceiling grille – the airflow arrow should point towards the wall or ceiling. Turn on the power to the forced air system.

    Enjoy cleaner air!