P2RFWG2 Refrigerator Water Filters
Learn More About The P2RFWG2 Filter
How To Install The 4396841 Filter:
- Locate filter in the grille near the bottom of your refrigerator
- Push button firmly until filter pops out
- Remove cap from filter by twisting counter-clockwise
- Reinstall cap on new filter and remove red caps from end of filter
- Insert new filter in refrigerator and push in firmly until it clicks in place
Marvel at the specifications of our 4396841 compatible filter.
|Change Frequency||6 Months|
|Filtering Capacity||200 Gallons|
|Contaminents Filtered||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates|
|NSF Rating||42, 53|
|Flow Rate||.5 GPM|
|Pressure Range||30-120 PSI|
|Operating Temperature||33-100 °F|
The Whirlpool 4396841 refrigerator water filter does an amazing job at removing the pollutants from your home water supply. It reduces contaminants such as chlorine odor, lead, and other particulates. The filter is an OEM product made with factory original parts. It has met the NSF International standards to receive a rating of 42 and 53. The filtering capacity is 200 gallons with a flow rate of .85 gallons per minute. The filters pressure range is 30-120 PSI and operates at a temperature of 33-100 degrees Fahrenheit. It is recommended that you make sure to replace this filter at least once every 6 months. Installation is easy and this filter is guaranteed to fit any refrigerator model that uses this filter or a compatible filter. When using the Whirlpool 4396841 Pur Deluxe refrigerator filter correctly, the water and ice from your refrigerator will be at its highest quality.
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF Ratings
Some filters that are not NSF rated are still constructed from NSF rated components.
Save Your Furnace Tip #12:
Install a thermostat with a filter change feature. Some thermostats can be configured to keep track of either calendar days or system run time and display a message when it’s time to change your filter, humidifier water pad, or UV bulb.