MSWF3PK Refrigerator Water Filters
Learn More About The MSWF3PK Filter
How To Install The MSWF Filter:
- Remove old filter cartridge by grasping and slowly rotating to the left (counterclockwise)
- Position new cartridge inside the cartridge holder and slowly rotate the cartridge to the right (clockwise) until it stops. The cartridge will rotate about 1/2 turn. Do not overtighten
- Flush 4.5 gallons through the filter before use. This will clear the system and prevent sputtering
- Press and hold reset water filter button if your fridge has one
- Replace the filter every 6 months
Marvel at the specifications of our MSWF compatible filters.
|Change Frequency||6 Months||6 Months|
|Filtering Capacity||300 Gallons||300 Gallons|
|Contaminants Filtered||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates|
|NSF Rating||-||42, 53|
|Flow Rate||0.5 GPM||0.9 GPM|
|Pressure Range||30-125 PSI||33-120 PSI|
|Operating Temperature||33-100 °F||33-100 °F|
You can choose between two MSWF model water filters: The GE MSWF brand is the factory original OEM product. The IcePure RFC1500A is the aftermarket MSWF model water filter. Both brands have advantages and disadvantages that you will have to factor into the purchase decision process. The strength of the factory original GE MSWF lies in its NSF International certifications. The GE brand was certified against Standard 42 and Standard 53, very high grades in regards to water filtration performance. The IcePure RFC1500A is not certified by NSF in such purity performance testing, showcasing the quality of the GE brand. The GE brand, however, is also the most expensive. In the end, whatever model you decide on will be great.
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF Ratings
Some filters that are not NSF rated are still constructed from NSF rated components.
Save Your Furnace Tip #7:
When you place your order you can sign up for a free Filter Change Reminder email. We will send you an email when it’s time to change your filter!