DA290003G Refrigerator Water Filters
Learn More About The DA290003G Filter
How To Install The DA29-00003G Filter:
- Remove old filter cartridge by grasping and turning to the left about 1/4 turn
- Apply the month sticker (included) to the cartridge as a reminder to replace the filter with 6 months and remove red cap
- Align unlabeled side of filter with the indictor line so that it can be inserted into the filter cover
- Turn the cartridge 1/4 turn to the right to lock it into place - you will feel a stop and the locked symbol should now be lined up with the indicator line
- Run water through the dispenser for 5 minutes to purge the system
- Press and hold ice type and child lock button simultaneously to reset filter indicator if your fridge has one
Marvel at the specifications of our DA29-00003G compatible filters.
|Change Frequency||6 Months||6 Months||6 Months|
|Filtering Capacity||300 Gallons||300 Gallons||300 Gallons|
|Contaminents Filtered||Chlorine, Taste, Odor||Chlorine, Taste, Odor||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates|
|NSF Rating||-||-||42, 53|
|Flow Rate||.5 GPM||.5 GPM||0.5 GPM|
|Pressure Range||20-120 PSI||20-120 PSI||20-125 PSI|
|Operating Temperature||33-100 °F||33-100 °F||33-100 °F|
The DA29-00003G filter is extremely efficient at removing contaminants from your water supply. The OEM Samsung replacement has been tested and certified to meet NSF Standard 42 and Standard 53, which means that is has been certified to remove chlorine and other contaminants from your water. The aftermarket Supco replacement has many of the same features as the OEM, but at a much lower, affordable price. The aftermarket Swift Green is the lowest priced option we offer and was manufactured with an eco-friendly process. Don’t let the price fool you though, it is still just as effective at purifying your water as the other models. The primary difference between the OEM and aftermarket filters is price and NSF ratings. Even though the aftermarket filters aren't NSF certified, we still recommend them due to their affordable price and filtering abilities.
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF Ratings
Some filters that are not NSF rated are still constructed from NSF rated components.
Save Your Furnace Tip #3:
Did you know that the nominal size of your air filter is probably not the same as the actual size? Just like measurements on lumber, the actual size of an air filter is usually slightly smaller than the nominal size.