Replacement Refrigerator Filters for 9082

  • Best Value
Whirlpool EDR2RXD1
$72.95 / filter
3 Pack Selected
  • Change every 6 Months
  • Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates
  • NSF/ANSI 42, 53
  • Compare More
Learn More

Product Description

The W10413645A model water filter is used in a wide-variety of refrigerators. Such brands include, KitchenAid, Kenmore, Whirlpool, Maytag, and Jenn-Air. Such versatility makes the W10413645A model an enticing purchase to water filter users. This W10413645A model features an easy installation design and should be changed regularly at least once every six months. This model's factory original OEM is manufactured by the Whirlpool brand. The Whirlpool brand's OEM was put through rigorous testing to ensure optimum performance and public safety by NSF/ANSI International. The filter graded out with flying colors. NSF/ANSI International certified Whirlpool's W10413645A filter against both Standard 42 and 53. Whirlpool's factory original OEM will ensure a reduction of chlorine taste, odor, cysts, lead, particulate, and other potentially harmful chemicals found in your water.


How To Install The W10413645A Filter:

  1. Locate the filter door in the right side of the refrigerator ceiling.
  2. Press in up on the filter cover door to release the door latch. The door will drop down.
  3. If you are replacing a filter rotation the used filter counter clockwise to remove it from the filter head. Note: there may be some water in the filter and some spilling may occur.
  4. Take the new water filter out of the packaging and remove the cap. Be sure the O-rings are still in place after the cover is removed.
  5. Align the arrow on the water filter label with the cutout notch in the filter head and insert the filter.
  6. Turn the filter clockwise until it locks into the housing.
  7. Lift the filter up into the compartment. Close the filter door completely.
  8. Reduce water spurts by flushing air from the system. Run water continuously for 4 gallons (approximately 5 minutes) through the dispenser until water runs steady. Additional flushing may be required in some households where water is of poor quality.


The filters below are 100% compatible with part number W10413645A
46 9082

Product Comparison

Marvel at the specifications of our W10413645A compatible filter.

Also known as Filter 2, this factory original OEM Whirlpool PUR W10413645A water filter is a great addition to your home. The W10413645A filter is well-known for optimum water filtration performance against potentially harmful impurities found in your water supply. Such harmful impurities include lead, chlorine, turbidity, particulate, and chemicals. So how does the W10413645A OEM water filter protect my home from such harmful substances? This Whirlpool OEM filter has been tested by NSF/ANSI International, a public health and safety organization dedicated to making sure you have quality products that truly work. After intense testing by NSF, it deemed the W10413645A water filter safe against the harmful substances listed above; certifying the filter against Standard 42 and Standard 53. To ensure your filter performs at a high level, make sure to change it once every six months.

6 Months
200 Gallons
Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates
NSF/ANSI 42, 53
.75 GPM
30-120 PSI
33-100 °F

The Difference

  • Free Shipping on Qualifying Orders (Same Day)
  • Free Returns For 1 Year
  • 100% Compatibility Guarantee
  • Made With Care in Indiana USA
I would highly recommend purchasing this 3 pack of filters. The price I paid for three would have only netted me two from the store where I purchased my appliances.
- Janice H.
No need to buy bottled water, water tastes great, no nasty aftertaste. Now my family is drinking plenty of water again w/out having to resort to flavored drinks to cover up bad tasting tap water. Very simple installation, good price. Very pleased with pur
- Jerry C.