The GSWF model filter comes in three brands; GE, Supco, and Swift Green. Each filter has its advantages and disadvantages that will factor into your purchase decision. The factory original OEM GE filter is the most expensive of the three, however it is also the most highly rated of the three. The GE GSWF filter is the only one to receive passing grades from NSF/ANSI International for Standards 42 and 53. Supco and Swift Green did not receive passing grades on such tests; showcasing the superior performance of the GE brand GSWF model filter. The Swift Green brand GSWF is the least expensive of the three however, appealing to an advantage your wallet will enjoy. The Swift Green brand filter is also manufactured utilizing an environmentally friendly & conscious system in Canada. The Supco brand advantages include a tie-leading gallon capacity of 750 gallons and 0.5 GPM flow rate for its class.
Replacement Refrigerator Filters for 100810A
How To Install The GSWF Filter:
- Open cartridge cover by pushing in where indicated
- Remove old filter cartridge by slowly rotating to the left (counterclockwise)
- Position new cartridge inside the cartridge holder and slowly rotate the cartridge to the right (clockwise) until it stops. The cartridge will rotate about 1/4 turn. When installed correctly, the grip blade on the end of the cartridge should be positioned vertically for top-freezer models and horizontally for bottom freezer models. Do not overtighten
- Close cartridge cover
- Reset filter change indicator if your refrigerator has one
- Flush 1.5 gallons (approximately 3 minutes) through the filter before use. This will clear the system and prevent sputtering
The filters below are 100% compatible with part number GSWF
Marvel at the specifications of our GSWF compatible filters.
The DiscountFilters.com Difference
- Free Shipping on Orders Over $50 (Same Day)
- Free Returns For 1 Year
- 100% Compatibility Guarantee
- Made With Care in Indiana USA
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF/ANSI Ratings
Some filters that are not NSF/ANSI rated are still constructed from NSF/ANSI rated components.