T1RFWB2 Refrigerator Water Filters
Learn More About The T1RFWB2 Filter
How To Install The 4396710 Filter:
- Locate filter in the grille near the bottom of your refrigerator
- Push button firmly until filter pops out
- Remove cap from filter by twisting counter-clockwise
- Reinstall cap on new filter and remove red caps from end of filter
- Insert new filter in refrigerator and push in firmly until it clicks in place
Marvel at the specifications of our 4396710 compatible filter.
|Change Frequency||6 Months|
|Filtering Capacity||200 Gallons|
|Contaminants Filtered||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates|
|NSF Rating||42, 53|
|Flow Rate||.5 GPM|
|Pressure Range||30-120 PSI|
|Operating Temperature||33-100 °F|
If you're looking to have cleaner and healthier water, then this is the filter for you. The factory original Whirlpool 4396710 filter fits into multiple Whirlpool refrigerators as well as many other refrigerator brands. I hope your thirsty, because this filter can clean up to 200 gallons of water before needing to be replaced, which is usually about every six months. The Whirlpool replacement filter is certified to meet NSF standards 42 and 53, meaning it is certified to reduce chlorine, chemicals, minerals, dirt, and cysts from your water. Once easily installed, this filter will deliver your water at a steady pace of half a gallon per minute. It has an optimal temperature range of 33-100 degrees and an optimal pressure range of 30-100 PSI. This filter will take away any doubts that you have about your water so you can drink and cook with your water worry-free.
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF Ratings
Some filters that are not NSF rated are still constructed from NSF rated components.
Save Your Furnace Tip #11:
For better indoor air quality (IAQ) consider running your system fan continuously, or install a thermostat that has a "circulation" or programmable fan function.