1159140 Refrigerator Water Filters
Learn More About The 1159140 Filter
How To Install The EWF2CBPA Filter:
- Turn off the icemaker using the power switch
- Press the filter release button adjacent to the old filter - discard old filter
- Push the new filter straight into the filter receiver until you hear a double "click"
- Turn the power back on to the icemaker
- Reset the change water indicator by referring to instructions in your owners manual
- Replace the filter once every 6 months
Marvel at the specifications of our EWF2CBPA compatible filters.
|Change Frequency||6 Months||6 Months|
|Filtering Capacity||300 Gallons||400 Gallons|
|Contaminants Filtered||Chlorine, Taste, Odor||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates|
|NSF Rating||42||42, 53|
|Flow Rate||0.5 GPM||0.5 GPM|
|Pressure Range||30-100 PSI||30-100 PSI|
|Operating Temperature||33-100 °F||33-100 °F|
Manufactured by Electrolux, this factory original OEM for filter model EWF2CBPA can fit snuggly in Pure Advantage Ice and Water Filtration Systems as well as Electrolux fridges. In addition to that, this filter can also fit all ICON side-by-side systems. If you feel like your water supply quality is insufficient or you're just looking to further improve overall water quality, then you've found the right filter. This original OEM EWF2CBPA has been conducted through sharp testing by NSF International, an organization dedicated to public and environmental health. After certification in both Standard 42 and Standard 53 by NSF, this filter was deemed adept to shield your water supply from cysts, turbidity, lead, chlorine, foul odor, and other potentially harmful chemicals and impurities. Water filters perform optimally when changed at least once every six months in your home.
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF Ratings
Some filters that are not NSF rated are still constructed from NSF rated components.
Save Your Furnace Tip #8:
If you have a 6-month filter, schedule your filter changes when daylight savings changes. When you "spring forward" or "fall back" setting clocks around the house, change your filter at the same time.