Trane FLR06461 | Our#: 186135

Trane CleanEffects Collection Cells for 21" Downflow Furnace Cabinets

Trane FLR06461 | Our#: 186135

  •  Fast Shipping & Free Returns
  •  100% Compatibility Guarantee

Replace Collection Cells in Trane CleanEffects Cabinets Used in 21" Downflow Furnace units

  • Change Every 6 Months
  • Original Manufacturer Part

5 people in your area recently purchased this product!

  •  Fast Shipping & Free Returns
  •  100% Compatibility Guarantee
Frequently Purchased Together
Frequently Purchased Together

Product Details

Trane CleanEffects Collection Cells for TFD21DCLFR Downflow Furnace Cabinets

This package of two collection cells is the OEM Trane replacement for the Collection Cells in 21" cabinets. Each cell measures approximately 20-1/2" X 10-1/4" X 3".

The air cleaner is factory set to notify the home owner to clean the COLLECTION CELLS every six months [31 weeks] of actual run time of the air cleaner.

Vacuuming is the preferred method to clean the PREFILTER and COLLECTION CELLS. It is recommended that the PRE-FILTER and the COLLECTION CELLS be vacuumed outside the home to ensure particles on the filters are not reintroduced into the air. Persons highly sensitive to the collected particles should wear appropriate respiratory protection while cleaning.

These collection cells will fit in these cabinets:

AFD21DALFH000BB
AFD21DALFH000BC
AFD21DALFR000AA
AFD21DALFR000AB
AFD21DALFR000BB
AFD21DALFR000BC
AFD21DALFR000CC
AFD21DALFR000CD
AFD21DALUPGRDAA
AFD21DALUPGRDAB
AFD21DALUPGRDAC
AFD21DALUPGRDAC
AFD21DALUPGRDCC
AFD21DALUPGRDCD
AFD21DCLFR000CD
AFD21DCLFR000CE
AFD21DCLFR000DA
AFD21DCLFR000EA
AFD21DCLFR000EB
AFD21DCLFR000EC
AFD21DCLFR000FA
TFD21DALFH000BB
TFD21DALFR000AA
TFD21DALFR000AB
TFD21DALFR000BB
TFD21DALFR000BC
TFD21DALFR000BC
TFD21DALFR000CC
TFD21DALFR000CD
TFD21DALUPGRDAA
TFD21DALUPGRDAB
TFD21DALUPGRDAC
TFD21DALUPGRDAC
TFD21DALUPGRDCC
TFD21DALUPGRDCD
TFD21DCLFR000CD
TFD21DCLFR000CE
TFD21DCLFR000DA
TFD21DCLFR000EA
TFD21DCLFR000EB
TFD21DCLFR000EC
TFD21DCLFR000FA


Specifications

Height:
3"
Length:
20-1/2"
Width:
10-1/4"


How to change your furnace/air-conditioner/HVAC air filter

Estimated time: 10 minutes or less

Steps

  1. Determine the location of your filter

    Your forced air system will be similar, whether or not it is a heating (furnace) or cooling (AC) system – or both. The furnace filter housing/slot is located right next to the heating/cooling system’s air handler or blower. Your filter(s) may also be located in a return grille on the wall or ceiling of your home.

  2. Determine the type/size of filter that you use

    Typically, the dimensions or part number of the filter will be printed on the filter frame. Use this information to order a new filter.

  3. Purchase a new air filter from DiscountFilters.com

    Visit DiscountFilters.com and purchase a new filter. Use our filter finders to verify the correct match.

  4. Remove the old filter

    Turn off the power to the heating/cooling system and remove the old filter from its housing/slot and discard.

  5. Insert the new filter

    Pay attention to any airflow direction arrows printed on the frame of the new filter. Install the filter by sliding it into the filter housing/slot with the airflow arrow pointing towards the blower. If installing the filter in a wall or ceiling grille – the airflow arrow should point towards the wall or ceiling. Turn on the power to the forced air system.

    Enjoy cleaner air!