Everpure EV960800 | Our#: 111883

4-JT SANITIZING CARTRIDGE 1PK

Everpure EV960800 | Our#: 111883

  •  Fast Shipping & Free Returns
  •  100% Compatibility Guarantee

4-JT SANITIZING CART 1PK (9608-00)

  •  Fast Shipping & Free Returns
  •  100% Compatibility Guarantee
Frequently Purchased Together

Product Details

The ultimate flushing tool for Pentair Everpure systems. The preferred way to introduce ScaleKleen® scale remover or other sanitizing agents, such as bleach, into all water-using appliances and vending machines.

 

  • Fits into existing Everpure filter heads
  • Eliminates the need for difficult component disassembly
  • An easy, convenient tool to help you clean and maintain your equipment
  • Recommended by NAMA®  (National Automatic Merchandising Association)

SCALEKLEEN INSTRUCTIONS FOR STEAMERS WITH EXISTING EVERPURE FILTER

1. Remove and discard the existing Everpure ?lter cartridge from the steamer.

2. For a small steamer (less than 10KW or 100,000 BTU's), use two 2.2 lb. (two kilogram) packages of ScaleKleen. For a large steamer (greater than 10KW or 100,000 BTU's), use four 2.2 lb. (four kilogram) packages of ScaleKleen. For regularly scheduled maintenance, reduce these quantities in half.

3. Remove the top plug assembly from the Everpure JT Cartridge. NOTE: The JT Cartridge is designed to hold a maximum of one 2.2 lb. (one kilogram) package of ScaleKleen.

4. Cut one corner of the ScaleKleen package, and pour the contents directly into the JT Cartridge. Once the ScaleKleen is in the cartridge, carefully reinsert the top plug assembly.

NOTE: Ensure that the plug assembly is seated to the lugged outer cap. If not, placement of the JT Cartridge into the head will be hindered.

As an alternative, you can dissolve one 2.2 lb. (one kilogram) package of ScaleKleen in warm water. Carefully pour the solution into the JT Cartridge. Repeat this step until all of the solution has been used.

5. Insert the ?lled JT Cartridge into the head assembly, and turn the shut-off valve to the fully opened position.

6. Flush the cartridge for a minimum of 1 gallon (a ?ow rate of 0.5 GPM would require 2 minutes) to transfer the ScaleKleen into the boiler tank to be de-scaled.

7. Turn the steamer on. Once the steamer reaches operating temperature, allow 30 minutes for the ScaleKleen to remove the scale, then turn the steamer off.

8. Blowdown (?ush) the boiler until the pH of the ef?uent is within one pH unit of the incoming (in?uent) water.

9. Once the steamer has been ?ushed out, it can be placed back into service.

10. After all de-scaling has been completed, remove the JT Cartridge and install a new Everpure ?lter cartridge.

 

SCALEKLEEN INSTRUCTIONS FOR DRIP COFFEE MAKERS

1. Remove and discard the existing Everpure ?lter cartridge.

2. For coffee makers brewing one pot (1/2 gallon) per cycle, use one 2.2 lb. (one kilogram) package of ScaleKleen. For regularly scheduled maintenance, reduce these quantities in half.

3. Remove the top plug assembly from the Everpure JT Cartridge. NOTE: The JT Cartridge is designed to hold a maximum of one 2.2 lb. (one kilogram) package of ScaleKleen.

4. Cut one corner of the ScaleKleen package, and pour the contents directly into the JT Cartridge. Once the ScaleKleen is in the cartridge, carefully reinsert the top plug assembly.

NOTE: Ensure that the plug assembly is seated to the lugged outer cap. If not, placement of the JT Cartridge into the head will be hindered.

As an alternative, you can dissolve one 2.2 lb. (one kilogram) package of ScaleKleen in warm water. Carefully pour the solution into the JT Cartridge. Repeat this step until all of the solution has been used.

5. Insert the ?lled JT Cartridge into the head assembly, and turn the shut-off valve to the fully opened position.

6. Remove the ?lter basket and spray head, then dump the coffee grounds from the machine. Place the spray head in the target coffee pot.

7. Cycle the coffee maker once, vending one pot. Let it sit for 30 minutes. The spray head in the pot will also be cleaned.

8. After 30 minutes, cycle the coffee maker with 10 pots of fresh water. This will ?ush the ScaleKleen from the boiler and water lines. After the tenth pot, check the pH of the hot water. When the pH of the hot water is within one pH unit of the incoming cold water, the ScaleKleen is ?ushed out. Reassemble the spray head to the coffee maker.

NOTE: If there is a hot water tap available, ?ush one pot through to de-lime tap.

9. Once the coffee maker has been ?ushed out, it can be placed back into service.

10. After all de-scaling has been completed, remove the JT Cartridge and install a new Everpure ?lter cartridge.

 

CAUTION: In case of contact with eyes or skin, rinse thoroughly with water. Avoid prolonged contact with stainless steel surfaces. Contains salt which may cause surface discoloration. Spots may be removed with a mild scouring agent.

 


Additional Information