Totaline P101-1420M | Our#: 177432

Media Pads for Star Series Electronic Air Cleaners - 14x20, 6-Pack

Totaline P101-1420M | Our#: 177432

  •  Fast Shipping & Free Returns
  •  100% Compatibility Guarantee

Media Pads for CG1000 Electronic Air Cleaners - 14x20, 6-Pack

  • Change Every 12 Months
  • Original Manufacturer Part
  •  Fast Shipping & Free Returns
  •  100% Compatibility Guarantee
Frequently Purchased Together

Product Details

Media Pads for Star Series CG1000 Electronic Air Cleaners - 14x20, 6-Pack

Includes 2 bags of 6 filter pads each - good for 6 filter changes.  Two filter pads are required for each filter changeout.

Actual Media Pad Size - 12-1/4" X 17-1/4". 

The Star SERIES 1000 Electronic Air Cleaner creates a polarized charge on the media pads, causing airborne particles to "stick" to the pads. This provides a means of disposing of the particles and removing them as the media pads are replaced. Recommended replacement is every 4 months.

FEATURES:

  • Hypo Allergenic Material
  • High Density Fire Retardant
  • Unique Dry Weave Material
  • Pre-Cut to Size
  • Highest Surface Area Safe
  • Simple Replacement

Additional Information




How to change your furnace/air-conditioner/HVAC air filter

Estimated time: 10 minutes or less

Steps

  1. Determine the location of your filter

    Your forced air system will be similar, whether or not it is a heating (furnace) or cooling (AC) system – or both. The furnace filter housing/slot is located right next to the heating/cooling system’s air handler or blower. Your filter(s) may also be located in a return grille on the wall or ceiling of your home.

  2. Determine the type/size of filter that you use

    Typically, the dimensions or part number of the filter will be printed on the filter frame. Use this information to order a new filter.

  3. Purchase a new air filter from DiscountFilters.com

    Visit DiscountFilters.com and purchase a new filter. Use our filter finders to verify the correct match.

  4. Remove the old filter

    Turn off the power to the heating/cooling system and remove the old filter from its housing/slot and discard.

  5. Insert the new filter

    Pay attention to any airflow direction arrows printed on the frame of the new filter. Install the filter by sliding it into the filter housing/slot with the airflow arrow pointing towards the blower. If installing the filter in a wall or ceiling grille – the airflow arrow should point towards the wall or ceiling. Turn on the power to the forced air system.

    Enjoy cleaner air!