Ready Filters Replacement for Whirlpool 4396701 Filter, 3-Pack

Ready Filters WF-1230A | Our#: 181945

1 Year Purchase Guarantee - Free returns for a year, up to $1000 of purchase protection.

Ready Filters Replacement for Whirlpool 4396701 Filter, 3-Pack
3 pack
Description

The Ready Filters WF-1230A filter is used in refrigerators by Whirlpool, KitchenAid, Jenn-Air Amana and others.  It is designed to replace the Whirlpool # 4396701 and EDR6D1 filter and fits select top-freezer and undercounter refrigerators.  The WF-1230A creates better tasting water for drinking and making beverages as well as clean, clearer, healthy ice. 

Features:

  • High quality - inexpensive alternative to factory original filter
  • Easy installation and operation
  • Helps reduce chlorine taste and odor
  • Helps reduce contaminants found in tap water and improves its quality
  • Used in some top-freezer and undercounter refrigerator models by Whirlpool, KitchenAid and others
  • Filter length approximately 9-1/2".  Approximately 1-3/8" in diameter
  • Replaces Whirlpool part numbers EDR6D1 and 4396701
Ready Filters Whirlpool
$22.95 per filter $50.95 per filter
6 Month Filter 6 Month Filter
30-120 psi 30-120 psi
33 - 100 °F 33 - 100 °F
200 Gallon Capacity 200 Gallon Capacity
0.5 GPM Flow Rate 0.5 GPM Flow Rate

The Ready Filters WF-1230A is compatible with the following obsolete or alternate filter part numbers:

046-9915
09915P
2301706
4396701
4396702
4396703
4396706
46-9915
4609915000
469915
6701
9915
9915P
EDR6D1
EFF-6001A
FILTER 6
FILTER6
L120V
L200
L200V
LC200V
NL120V
NLC120V
RWF1021
SGF-W10
WF-293
WF-L120V
WF-L200
WF-L200V
WF-LC200V
WF-NL120V
WF-NLC120V
WF293
WFI-NL120V
WFINL120V
WFL120V
WFL200
WFL200V
WFLC200V
WFNL120V
WFNLC120V
WSW-3

How To Install The Ready Filters WF-1230A Filter:

How to install the Ready Filters WF-1230A filter
  1. Remove old filter cartridge by grasping and turning clockwise until the filter is released from the filter head
  2. Slide the filter cartridge cap onto the end of the new filter cartridge (after removing from old cartridge)
  3. Insert filter into the compartment in the base grille, pushing until it stops
  4. Rotate the cap clockwise 1/4 turn until it stops and it is in a horizontal position
  5. Dispense water through the water dispenser for 2 minutes or until the water become clear.  This will activate the system while clearing any trapped air in the water line
  6. Replace filter every 6 months