UKF-7003P Refrigerator Water Filters
Learn More About The UKF-7003P Filter
How To Install The UKF7003 Filter:
- Remove old filter cartridge by grasping and gently turning counterclockwise until it releases from the filter head - discard
- Line up the cartridge ears so it can be inserted into the filter head. Rotate the cartridge into the head. Twist the cartridge 1/4 turn clockwise until it locks into place
- Run water continuously through dispenser for 3 gallons until water runs steady and sputtering stops
- Reset water filter change notification by following instructions in owners manual
Marvel at the specifications of our UKF7003 compatible filters.
|Change Frequency||6 Months||6 Months|
|Filtering Capacity||375 Gallons||416 Gallons|
|Contaminents Filtered||Chlorine, Taste, Odor||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates|
|NSF Rating||-||42, 53|
|Flow Rate||.5 GPM||.5 GPM|
|Pressure Range||20-120 PSI||30-125 PSI|
|Operating Temperature||33-100 °F||33-100 °F|
The UKF-7003P model filter helps reduce pollutants that can be found in your drinking water. The original OEM filter is manufactured by Whirlpool. It is the only brand filter to meet NSF International Standards 42 and 53. Such high marks by NSF International indicate a superior refrigerator water filter. The aftermarket, the ClearChoice CLCH115 brand UKF-7003P however is the less expensive filter if you are focused on watching your budget. All of the brands for the UKF-7003P model have equally fast flow rates that dispense water at half a gallon per minute. All of the brands also have similar gallon holding capacities, however Whirlpool slightly edges out its competition with a class-leading 416 gallons. Get free shipping and free returns every day on all discount refrigerator water filters and air filters.
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF Ratings
Some filters that are not NSF rated are still constructed from NSF rated components.
Refrigerator Water Filter Tip #3:
When a new refrigerator filter is installed, there may be some sputtering and spitting of water while air is forced out of the filter media. This is normal and will stop after the carbon media becomes saturated with water.