FC300 Refrigerator Water Filters
Learn More About The FC300 Filter
How To Install The EWF01 Filter:
- Turn off the icemaker using the power switch
- Press the filter release button adjacent to the old filter - discard old filter
- Push the new filter straight into the filter receiver until you hear a double "click"
- Turn the power back on to the icemaker
- Reset the change water indicator by referring to instructions in your owners manual
- Replace the filter once every 6 months
Marvel at the specifications of our EWF01 compatible filters.
|Change Frequency||6 Months||6 Months|
|Filtering Capacity||200 Gallons||200 Gallons|
|Contaminents Filtered||Chlorine, Taste, Odor||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates|
|NSF Rating||-||42, 53|
|Flow Rate||0.5 GPM||0.5 GPM|
|Pressure Range||30-100 PSI||30-100 PSI|
|Operating Temperature||33-100 °F||33-100 °F|
Built to fit Electrolux and Pure Advantage Ice and Water Filtration Systems, this EWF01 factory original OEM water filter by Electrolux is a fine addition to any household. Are you looking to protect your water supply from unwanted impurities? The EWF01 OEM has been certified by NSF International to do just that. NSF International is a public organization dedicated to ensuring both public and environmental health. NSF declared this filter sufficient in purifying your water from potentially harmful contaminants including chlorine, cysts, turbidity, chemicals, and particulate. Such high-grade certifications this EWF01 OEM filter received can be translated to sufficiencies in NSF's Standard 42 and Standard 53. It should be noted, this filter is not built for compatibility with ICON side-by-side systems. Water filters should be changed at least once every six months for ideal filtration.
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF Ratings
Some filters that are not NSF rated are still constructed from NSF rated components.
Save Your Furnace Tip #3:
Did you know that the nominal size of your air filter is probably not the same as the actual size? Just like measurements on lumber, the actual size of an air filter is usually slightly smaller than the nominal size.