DA97-03175A Refrigerator Water Filters
Learn More About The DA97-03175A Filter
How To Install The DA29-00012A Filter:
- Open front cover of the refrigerator filter housing in the upper right corner of your refrigerator compartment
- Remove the old cartridge by pushing in on the cartridge - it will eject with a clicking sound
- Insert new cartridge by pushing it into the housing until it clicks. Close the front cover of the refrigerator filter housing
- Flush the refrigerator water system after replacing the water filter cartridge. Sputtering may occur until air is purged from water line and filter
- Reset water filter status display - replace filter every 9 months
Marvel at the specifications of our DA29-00012A compatible filters.
|Change Frequency||6 Months||6 Months|
|Filtering Capacity||300 Gallons||300 Gallons|
|Contaminents Filtered||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates|
|NSF Rating||-||42, 53|
|Flow Rate||.75 GPM||0.75 GPM|
|Pressure Range||30-125 PSI||30-100 PSI|
|Operating Temperature||33-100 °F||33-100 °F|
Both the factory original Samsung Da 29-00012B and the Swift Green SGF-DSA21 filters are designed to effectively reduce pollutants that can be found in your water supply such as chlorine, minerals, chemicals and more. The major difference between the filter options is that the Samsung DA29-00012B has certifications for NSF standards 42 and 53. This means that it is certified to reduce chlorine as well as many other contaminants in your water. Other than that, the generic Swift Green SGF-DSA21 is of similar quality to the factory original. The Swift Green filter also has the same flow rate, filtering capacity, operating temperature, and pressure range as the OEM. The filters are guaranteed to fit into any refrigerator model that uses the DA29-00012B or compatible filter. Both of the filters are available in convenient 3-packs that can give your home fresh water for up to 18 months.
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF Ratings
Some filters that are not NSF rated are still constructed from NSF rated components.
Save Your Furnace Tip #3:
Did you know that the nominal size of your air filter is probably not the same as the actual size? Just like measurements on lumber, the actual size of an air filter is usually slightly smaller than the nominal size.