9905 Refrigerator Water Filters
Learn More About The 9905 Filter
How To Install The MXRC Filter:
- Remove old filter cartridge by grasping and turning to the left (counterclockwise)
- Filter the replacement cartridge with water from the tap to allow for better flow from the dispenser immediately after installation
- Lining up the arrow on the cartridge and the cartridge holder, place the top of th new cartridge up inside the holder. Do not push it up into the holder
- Slowly turn the new cartridge clockwise until the filter cartridge stops. Do not overtighten
- Run water from dispenser for 10 minutes (about 5 gallons) to clear the system and prevent sputtering
- Change the filter cartridge every 6 months
Marvel at the specifications of our MXRC compatible filter.
|Change Frequency||6 Months|
|Filtering Capacity||300 Gallons|
|Contaminents Filtered||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates|
|Flow Rate||0.5 GPM|
|Pressure Range||20-120 PSI|
|Operating Temperature||33-100 °F|
The factory original OEM water filter for the MXRC model is manufactured by GE SmartWater. The diversity in compatibilities for this water filter make it an attractive purchase to many homes. This water filter can be used in households that have an Amana, Hotpoint, Kenmore, or GE refrigerator. As an OEM factory original product, this water filter has gone through severe testing by NSF International to ensure a high-grade of water filtration performance for consumer safety. NSF International graded out this MXRC OEM water filter as sufficient against Standard 42. So what does this mean for you and your family? This means that the OEM water filter ensures safety against potentially harmful water impurities such as chlorine taste, lead, and other impurities. This filter also features a half gallon per minute flow rate, meaning you won't have to wait long to fill up a beverage.
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF Ratings
Some filters that are not NSF rated are still constructed from NSF rated components.
Save Your Furnace Tip #8:
If you have a 6-month filter, schedule your filter changes when daylight savings changes. When you "spring forward" or "fall back" setting clocks around the house, change your filter at the same time.