Both the OEM and aftermarket filter for the 12527304 water filter eliminate impurities that end up in your drinking water, including minerals, chemicals, and dirt. The OEM Maytag Clean 'n Clear and the aftermarket WaterSentinel replacement have the same change frequency, pressure range, flow rate, and 300 gallon filtering capacity. Each filter offered is guaranteed to fit the compatible refrigerator types and give you high quality water and ice. What differentiates the Maytag Clean 'n Clear from the aftermarket WaterSentinel, other than the price, is the fact that the OEM filter is NSF/ANSI certified. This means that the filter was tested against NSF/ANSI International standards for reducing health-related and aesthetic contaminants and received certifications for standards 42 and 53. The aftermarket filters did not receive this rating, even though some filters are made with NSF/ANSI approved parts.
469904P Refrigerator Water Filters
How To Install The 12527304 Filter:
- Turn old filter counterclockwise until cartridge stops. Discard old filter
- Push new cartridge into filter head
- Turn cartridge clockwise until cartridge stops
- Discard first 4 batches of ice after replacing cartridge and flush through water dispenser for at least three minutes
- The water filter cartridge should be replaced after 300 gallons of water or six months of use, whichever comes first
The filters below are in stock, and 100% compatible with part number 12527304
Marvel at the specifications of our 12527304 compatible filters.
The DiscountFilters.com Difference
- Free Shipping (Same Day)
- Free Returns For 1 Year
- 100% Compatibility Guarantee
- Made With Care in Indiana USA
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF/ANSI Ratings
Some filters that are not NSF/ANSI rated are still constructed from NSF/ANSI rated components.