240396701 Refrigerator Water Filters
Learn More About The 240396701 Filter
How To Install The WF2CB Filter:
- Turn off the icemaker using the power switch
- Press the filter release button adjacent to the old filter - discard old filter
- Push the new filter straight into the filter receiver until you hear a double "click"
- Turn the power back on to the icemaker
- Reset the change water indicator by referring to instructions in your owners manual
- Replace the filter once every 6 months
Marvel at the specifications of our WF2CB compatible filters.
|Change Frequency||6 Months||6 Months|
|Filtering Capacity||300 Gallons||400 Gallons|
|Contaminents Filtered||Chlorine, Taste, Odor||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates|
|NSF Rating||-||42, 53|
|Flow Rate||0.5 GPM||0.5 GPM|
|Pressure Range||30-100 PSI||30-100 PSI|
|Operating Temperature||33-100 °F||33-100 °F|
The Frigidaire WF2CB original OEM water filter's flexibility in its usage across the industry makes it an attractive product to consumers. Customers can look forward to utilization of this product in either their Electrolux, Frigidaire, Kenmore Pure Advantage, or PureSource2 Ice Water Filtration Systems. The factory original OEM product was put through serious testing by NSF International. NSF is a public organization dedicated to product testing for both public and environmental health. The WF2CB water filter ended up passing International testing with certifications for Standard 42 and Standard 53. These passing grades mean consumer safety from turbidity, chlorine, rust, cysts, and other potentially harmful impurities found in your water supply. In order to retain the highest level of water filtration performance, filters should be changed once every six months.
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF Ratings
Some filters that are not NSF rated are still constructed from NSF rated components.
Refrigerator Water Filter Tip #3:
When a new refrigerator filter is installed, there may be some sputtering and spitting of water while air is forced out of the filter media. This is normal and will stop after the carbon media becomes saturated with water.