238C2334P003 Refrigerator Water Filters
Learn More About The 238C2334P003 Filter
How To Install The MSWF Filter:
- Remove old filter cartridge by grasping and slowly rotating to the left (counterclockwise)
- Position new cartridge inside the cartridge holder and slowly rotate the cartridge to the right (clockwise) until it stops. The cartridge will rotate about 1/2 turn. Do not overtighten
- Flush 4.5 gallons through the filter before use. This will clear the system and prevent sputtering
- Press and hold reset water filter button if your fridge has one
- Replace the filter every 6 months
Marvel at the specifications of our MSWF compatible filters.
|Change Frequency||6 Months||6 Months||6 Months|
|Filtering Capacity||300 Gallons||300 Gallons||300 Gallons|
|Contaminants Filtered||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates||Chlorine, Taste, Odor, Sediment, Sand, Rust & Other Particulates|
|NSF Rating||-||53||42, 53|
|Flow Rate||0.5 GPM||0.5 GPM||0.9 GPM|
|Pressure Range||30-100 PSI||30-100 PSI||33-120 PSI|
|Operating Temperature||33-100 °F||33-100 °F||33-100 °F|
There are three brands you can choose for the MSWF model water filter; GE, Swift Green, and Supco. The GE brand is the factory original OEM product. Swift Green and Supco are both aftermarket carriers of the MSWF model water filter. All brands have advantages and disadvantages that will factor into your purchase decision process. The strength of the factory original GE MSWF lies in its NSF International certifications. The GE brand was certified against Standard 42 and Standard 53, very high grades in regards to water filtration performance. The other two aftermarkets were not certified by NSF in such purity performance testing, showcasing the quality of the GE brand. The GE brand, however, is also the most expensive. The Swift Green brand is most wallet-friendly in regards to price. Supco brand leads the way in the MSWF model class when it comes to gallon capacity at 750 gallons.
NSF/ANSI Standard 42
Filters tested against NSF/ANSI Standard 42 (aesthetic effects) are certified to reduce specific aesthetic or non-health-related contaminants (chlorine, taste and odor, and particulates) that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
NSF/ANSI Standard 53
Filters tested against NSF/ANSI Standard 53 (health effects) are certified to reduce specific health-related contaminants, such as Cryptosporidium, Giardia, lead, volatile organic chemicals (VOCs), MTBE (methyl tertiary-butyl ether), etc., that may be present in public or private drinking water. See filter performance data sheet or manufacturer's packaging for details.
Filters Without NSF Ratings
Some filters that are not NSF rated are still constructed from NSF rated components.
Refrigerator Water Filter Tip #5:
It’s a good idea to smear some food-grade silicone on the rubber rings at the end of your filter.