0

Know Your Fridge Filter T1RFWB2

The T1RFWB2 refrigerator water filter works seamlessly in your refrigerator to provide your family with clear, clean water on demand. It also removes impurities to make crystal clear ice cubes to use in your cold beverages.

Clean, filtered water just tastes better to drink and to make beverages with it. This fridge filter is an inexpensive way to promote health for your entire family through clean water. The T1RFWB2 filter fits in a variety of makes and models of refrigerators.

Whirlpool EDR3RXD1-2

The Filtration Process

The T1RFWB2 filter uses a scientifically designed form for the best filtration device possible. The exterior of the water filter is plastic and it contains an inner chamber of activated carbon. This type of carbon is engineered to be extremely porous in order to capture that tiniest of particles in your home water supply that contaminant your drinking water from your refrigerator through adsorption, the process of the particles adhering to the activated carbon interior.

Your household water enters your refrigerator from the rear and flows into the filter. As it exits the filter, it flows through one line to the icemaker and an additional line to the water dispenser on your refrigerator to provide clean, great tasting water and ice. The activated carbon attracts all impurities including cysts, lead, asbestos, mold, bacteria and chlorine. All of these items stay trapped in the filter, with the end result of refreshing water and ice that is healthy for all.

Water Filter Installation Instructions

The T1RFWB2 water filter is installed very easily and in only a minute or so. There are two types of installations that vary slightly depending on the location of your refrigerator water filter.

In the Refrigerator

1. Open your refrigerator and locate the water filter in the top rear of the refrigerator compartment.Whirlpool EDR3RXD1-1

2. Push the locking tab inward to release the latch.

3. Grasp the filter and turn it counterclockwise about one-quarter turn, until it releases.

4. Pull the old filter straight out.

5. Push a new filter into the chamber; turn it about one-quarter turn clockwise until it clicks in place.

In the Kick Panel

1. Locate your refrigerator filter in the bottom kick panel on the left side of your refrigerator.

2. Locate the recessed tab and pull it forward to unlock the filter.

3. Turn the filter one-quarter turn counterclockwise to release it.

4. Pull the old filter straight out.

5. Press a new filter in the chamber; turn it one-quarter turn clockwise to install it.

No matter the location of your water filter, you need to flush the system by running about two gallons of water through the water dispenser.

Change Your Water Filter Routinely

The T1RFWB2 water filter will seamlessly provide fresh water and ice for your family for approximately six months. After this time, the activated charcoal inside the filter is not as effective at removing particles and needs replacing. You may record the date on a calendar to remind you to change your filter every six months. Keeping a high quality filter on hand at the best prices available from DiscountFilters, is the best practice to always having healthy and refreshing water and ice.

Compatible Filters with the Whirlpool EDR3RXD1

2260515
2260538
2313412
4396710
4396710B
4396710P
4396710T
4396711
4396711B
46-9020
46-9020P
46-9030
46-9030P
4609020000
4609030000
469020
469020P
469030
469030P
6710
8212650
9020
9020B
9020P
9030
9030B
9030P
95357630
AP3710633
AP3866834
EFF-6016A
FILTER 3
FILTER3
P1KB1
P1KB2
P1RFKB1
P1RFKB2
P1RFWB2
P1RFWG2
P1WB2
P1WB2L
P1WG2
P1WG2L
P2WG2
P2WG2L
PB-SS
PBSS
PS971185
PS986832
RWFFRSXS
SGF-W71
T1KB1
T1KB2
T1RFKB1
T1RFKB2
T1RFWB2
T1RFWG2
T1WB2
T1WB2L
W10121145
W10177635
W10186667

Leave a Reply

Your email address will not be published. Required fields are marked *