0

Know Your Fridge Filter: 4609101000

Drink healthier, clearer, and cleaner water and ice with the 4609101000 refrigerator water filter. The fridge filter effectively functions to provide the cleanest, refreshing and most clear water. The DA29-00020B filter is the best design for removing an undesirable substance that could be present in water. After purification, the resultant water from the fridge filter is healthy, crystal clear and better tasting. Your drinking water is, therefore, safe for drinking and can be very significant in making beverages.

What makes the 4609101000 filter different and desirable since is it capable of fitting into different brands and models of refrigerators. The water filter fitting and installation process is also simple and easy.

DA29-00020B-graphics.JPGEcoAqua-filter-graphic

Filter process

The common process applied by  4609101000 is scientifically engineered filtration process. The process normally involves the use of activated carbon. An activated carbon can be said to be a form a carbon that is normally designed in a way that usually allows it to be more porous. The activated carbon is, therefore, through the pores used to remove the unwanted substance and impurities from the home’s tap water. The activated carbon has a large surface area. The significance of a large surface area is providing for a much superior adsorption. This is different from the common absorption. Adsorption process involved the adherence of the gas, liquid and sometimes the dissolved solids to the surface.

The actual filtration process starts when water enters the filter chamber in the refrigerator. Once the discount filter is filled with water, it is pushed to the activated carbon through an inner chamber. It is from here that the unwanted substances and the impurities are trapped. The trapped unwanted substances such as chlorine, cysts, bacteria, asbestos and molds do not go past this point. The clean water is, therefore, allowed to pass through the pores of the carbon. The result is crystal, clear and refreshing water.

How to Install Refrigerator Water Filters

The installation of refrigerator water filters is easy and requires these simple steps. The device is located at the upper right corner of most fridges. The discount fridge filters normally have one of the releases types. These are either push or pull. If it is a push tab, for instance, the tab location will be in the front of the filter housing. As such, the following steps are applicable;

  1. To open the housing, push the tab to release the latch
  2. Take off the filter by an anticlockwise action until it releases.
  3. When it is already released, pull the filter out.
  4. When it is time for replacing the filter, the process is simply reversed.

On the other hand, when it is usually a pull-tab, the location is usually on the front underside of the cover. As such, the following are its steps

  1. Start by removing the housing cover through identifying of the recessed tab
  2. Do the forward pull to release the latch
  3. Make one anticlockwise turn on the filter
  4. Make a straight pull of the filter outwards
  5. To replace the filter, it is advisable to reverse the process

NOTE; after the replacement is advisable to flush about 2 gallons of water off the filter before you commence usage.

Change Water Filter Routinely

As water continues to pass through DA29-00020B filter, the carbon in it becomes prone to degradation. A new filter every six-months is recommended.

Leave a Reply

Your email address will not be published. Required fields are marked *