0

Know Your Fridge Filter 100749C

Child with glass pitcher waterThe 100749C refrigerator water filter is designed to efficiently provide clean, clear, and great tasting drinking water to your home and replace the GE GSWF water filter. Never again will you have to worry about having to drink dirty, bad tasting water. The 100749C filter can remove unwanted contaminants from your indoor drinking water supply and provide great tasting water for all your beverage needs. This top quality refrigerator filter is one addition to your kitchen that you will never regret. The 100749C refrigerator filter is compatible with a wide variety of refrigerator models and brands.

 

The Filtration Process

Using a scientifically proven filtration method, the 100749C filter employs a material known as activated carbon to remove unhealthy contaminants from your tap water and transform it into great tasting drinking water. Activated carbon is a highly porous material with a very large microscopic surface area that enables it to perform an extraordinary amount of adsorption. Adsorption, easily confused with absorption, is the process where a substance that is dissolved in water is made to adhere to a surface.

 

The water filtration process starts when the water enters the unit after passing through the water line of your refrigerator. The 100749C water filter then begins to fill up with water as the unfiltered water is moved into the inner chamber which contains the activated carbon. The force of the water pressure against the filter scrubs the water as it moves, and the activated carbon exerts a magnetic attraction to particulates in the water. Whatever unwanted material is in your water- cysts, lead, chlorine, asbestos, bacteria, and mold- can be removed by this process resulting in fresh and clean water ready to drink or to be used to make beverages.

 How to install your water filter

The 100749C filter is easy to install if you follow these easy steps.

 

Locate the filter receptacle, usually in the upper right-hand corner of your refrigerator.

 GSWFinstall

Your filter will have either a push type release or a pull type release. If your filter is the push-tab type, you will find the tab on the front side of the filter.

 

1. Open the unit by pressing the tab in. This will release the latch.

 

2. Turn the filter counterclockwise until it is released.

 

3. Pull the filter in a straight line out from the receptacle.

 

4. Reverse this process to install the replacement 100749C filter.

 

If your filter is the pull tab type, you will find the release in a recession under the front side of the filter.

 

1. Remove the outer casing by locating and pulling the recessed tab.

 

2. Continue to pull the tab until the latch is released.

 

3. Then rotate the filter one-quarter of a turn counterclockwise.

 

4. Pull the filter in a straight line out from the receptacle.

 

5. Reverse this process to install the replacement 100749C filter.

 

After replacing your filter, you must flush it with 2 gallons of water before using. Do not drink the water used to flush the filter. Replace your filter every six months, or as recommended by the manufacturer and be sure to check out Discount Filters for all your filter needs.

Filters Compatible with the GE GSWF

100749-C
100749C
100810A
215C1152P002
238C2334P001
35917-MN-1
46-9914
469914
9914
AP3418061
EFF-6023A
GSWF
GSWF3PK
GSWFDS
GTH22SHP
GTS18KHP
GTS18SHP
GTS22KHP
PC36011
PC56994
PC58696
PDS20MCP
PDS20SCP
PDS22MCP
PDS22SCP
PDS22SHR
PFCS1NJWSS
PS951515
PTS22LHP
PTS22SHP
PTS25LHP
PTS25SHP
RWF1061
SGF-G22
WSG-2

Leave a Reply

Your email address will not be published. Required fields are marked *