How to Install a MWF Style Water Filter
0

How to Install a MWF Style Water Filter

The water filter cartridge is located in the back upper right corner of the refrigerator compartment. The filter cartridge should be replaced when the replacement indicator light turns red or if the flow of water to the dispenser or icemaker decreases. For refrigerators without an indicator light – replace the filters every 6 months.

How To Install The MWF Filter:

  1. Remove old filter cartridge by grasping and turning to the left about 1/2 turn
  2. Fill the replacement filter with water from the tap to allow for better flow immediately after installation
  3. Place the top of the new cartridge up inside the cartridge holder
  4. Slowly turn the filter until the filter cartridge stops. Do not overtighten. As you turn the cartridge it will automatically raise itself into position. The cartridge will move about 1/2 turn
  5. Run water from the dispenser for 3 minutes (about 1-1/2 gallons) to clear the system and prevent sputtering
  6. Press and hold the reset water filter button if your fridge has one

Find Replacement MWF Refrigerator Water Filters at: https://bit.ly/MWFStyleFilter

Leave a Reply

Your email address will not be published.