Clean and Cold Water at Home With a Fridge Water Filter

Should You Clean or Replace the Fridge Water Filter?

71% of Americans know home water filters reduce different contaminants lurking in their water. Yet, only 58% take the necessary steps to purify their drinking water. New refrigerators on the market today make it easy to filter water as most of them come with a built-in cold water dispenser.

Maintaining and regularly replacing your fridge water filter is key to keeping your drinking water fresh and pure. Beyond tasting better, other benefits of a working fridge filtration system include things like saving money and reducing waste from bottled water.

If you’re not sure how to clean your existing water filter or need to install a new one, you’re in luck! Keep reading to learn the ins and outs of fridge water filter cleaning and installation.

Signs It’s Time to Change Your Fridge Water Filter

Your refrigerator water filter is the most important factor when it comes to clean water. So, how do you know when your water filter should be cleaned or changed? There are a few signs that you should watch out for:

  • It’s been six months since you last changed the filter
  • The indicator light on the fridge is on
  • The water dispenser is taking longer than normal to fill up a glass
  • The water tastes funny
  • The ice smells funny or looks cloudy

To Clean or Replace the Filter?

Once you figure out that the water filter needs attention, you need to decide whether you should clean or replace it. If it’s only been a couple of months since you last changed your water filter, you can try cleaning it instead of shelling out the money to replace it.

To clean it, first, you need to find the filter. Most likely it will be at the base of the fridge in the grille, inside the door, or towards the upper right-hand corner of the interior. Once you find it, grab it and remove it.

From there it’s a simple process to clean the filter. Tap it over a garbage can or sink to remove any excess debris that has built up over time. Then submerge it into warm water mixed with soap or vinegar. You can also buy a cleaning product made specifically for cleaning filters.

Let the filter soak for about 30 minutes and then place it under running water until the water coming out of it looks clear. Let it air dry and then replace it back into the fridge. At this point, you should be getting fresh and clear water from your fridge. If you’re still having issues, it may be time to replace the filter.

How to Replace the Filter

If it’s time to replace the water filter in your fridge, don’t worry! It’s a quick and easy process.

Most fridge water filters that are sold today automatically shut off the water supply when they’re unscrewed. This saves you the hassle of finding the shutoff valve and manually turning the fridge water supply off. There are a couple of different types of water filters on the market, so we’ll walk through the process of replacing each one.

Twist-On Filters

To change a twist-on filter, you’ll need to rotate the filter counterclockwise ¼ of a rotation and pull the filter straight out. Take the filter out of the casing and place the new one inside. Push the new filter straight into the housing and turn it clockwise ¼ of a rotation. Make sure it is locked into position, and then you’re good to go!

Push-In Filters

Some push-in filters have a button to remove them from their housing. If this is the case, push the button and pull the filter out. If there is no button, push on the filter to release it from the spring latch that’s holding it in place.

Then, remove the cap from the old filter and place it on the new one. Push the new filter into the housing until it locks into place.

Make Sure You Flush Your Filter

The most common type of refrigerator water filter is a carbon filter. These filters use granular activated carbon to remove chemicals from water and are filled with black carbon granules.

You’ll notice that when water first flows through a new filter, there may be black specks in the water or the water looks gray and cloudy. That’s because the water initially pushes out some of the carbon. While it’s not harmful to drink discolored water, you probably don’t want to drink water with floating black specks in it.

Flushing a new filter is even easier than installing it. Use a large pitcher to collect about a gallon or two of water from the dispenser. This should typically be enough to get all the black granules out. You can dispose of this water or use it to water your plants.

Keep Up Your Fridge Filter Maintenance

Refrigerator filter maintenance is so important for the quality of your water. It will provide your family and all your guests with the peace of mind that they’re drinking clean water, and will taste good too!

Now that you know how, are you ready to roll up your sleeves and change your fridge water filter? With the help of this guide, keeping your drinking water clean and fresh should be a breeze.

If it’s time to change your fridge filter, use a ClearChoice Filter for a cost-effective replacement made proudly in Greenwood, Indiana!

2 thoughts on “Should You Clean or Replace the Fridge Water Filter?”

Leave a Reply

Your email address will not be published.