Know Your Fridge Filter: 9690

Enjoying clean, cool, and refreshing water is essential for staying hydrated. However, if your refrigerator water filter is old, you could be at risk for drinking hazardous dirt that could cause you harm. Avoid the potential for sickness by choosing the 9690 water filter. As an aftermarket replacement for the LT700P fridge filter, it fits into a variety of refrigerators for optimum compatibility. It works to filter out undesirable particles and unsavory bacteria to provide you and your household with clean water that can be used for drinking or cooking.


How Filtering Works

The 9690 discount water filter utilizes scientific advances to create an impenetrable barrier against harmful additives. The main way it does this is by using activated carbon. Activated carbon is highly adsorbent and porous, meaning that it can catch and hold tiny particles. These refrigerator filters each include an inner chamber of activated carbon that collects all the bad materials.

The journey to clean water begins when water flows into the filter from your home water supply. As the water drains through the filter, it reaches the activated carbon, which grabs any undesirable particles, such as bacteria, cysts, mold, asbestos, chlorine, or lead. These substances are then left behind inside the filter as the clean and clear water passes through the carbon, providing you with a refreshing beverage whenever you crave it. The entire process takes only a few seconds.

How to Install

While it may sound daunting to install such an advanced piece of technology, it is actually quite easy to switch out your old filter for a new 9690 discount filter. The first step is to find out where your filter is located, usually near the upper right corner on the inside of the refrigerator. Next, determine is the 9690 water filter is a push or pull release.

For a push tab, you should see a tab on the front of the filter housing.

  1. Push the tab inward to release the outer casing.
  2. Take out the old filter by turning it in a counterclockwise direction until it loosens.
  3. Pull the filter straight out, making sure it is completely released.
  4. Install the new filter by repeating this process in reverse.

For a pull tab, you should see a recessed tab underneath of the front cover.

  1. Pull the tab forward to release the outer casing.
  2. Turn the filter one quarter clockwise.
  3. Pull the filter straight out, making sure it is completed released.
  4. Install the new filter by repeating this process in reverse.

For both types of installations, always flush the new filter with two gallons of water before using it.

Change Your Filter Regularly

Because of the superior adsorption qualities of the carbon, these water filters don’t last forever. The carbon will become less and less effective at collecting foreign materials, raising the potential for you to get sick. Always change your filter once every six months to have clean, clear, and healthy water on demand.

Leave a Reply

Your email address will not be published.