BestAirPro SG211BOX | Our#: 180322
Expanded, Box-Style Replacement for Aprilaire 213 Filter
BestAirPro SG211BOX | Our#: 180322
- Fast Shipping & Free Returns
- 100% Compatibility Guarantee
Reduce common allergy symptoms
- Reduces allergy irritating particles
- Captures allergens like dust, mold spores, pet dander, dust mite debris and more
- Lessens odors from car fumes & smog
- Creates cleaner indoor air
- Fast Shipping & Free Returns
- 100% Compatibility Guarantee
Frequently Purchased Together
Product Details
Expanded, Box-Style Replacement for Aprilaire 213 Filter - 2-Pack
Actual dimensions - 20-1/8" X 25-1/4" X 4-1/8"
Features:
- Budget, "fully expanded" version of original accordian-style filter
- Familiar, box style replacement slides in easily
- Traps and removes over 65% of particles from 1.0 to 3.0 microns in size.
- Traps and permanently removes over 90% of pollen, mold and spore sized particles from 3.0 to 10.0 microns in size.
- Special push tabs make space so that door can be installed without interfering with filter
- Rated MERV 11
- Note: This product is not manufactured or distributed by Research Products Corporation, owner of the registered trademark Aprilaire®.
Fits the following Aprilaire Air Cleaners:
- Model 2200 after upgrading with #1213 Media Upgrade Kit
- Model 2120 after upgrading with #1213 Media Upgrade Kit
- Model 1210
- Model 2210
- Model 3210 (new premium model with electronic control)
- Model 4200 (old premium model with electronic control)
Instructions:
1). Turn of HVAC system
2). Remove Air Cleaner door
3). Remove dirty filter
4). Push in 4 tabs on filter
5). Install new (clean) filter with Air Flow arrow pointing toward furnace or air handler. Replace door.
How to change your furnace/air-conditioner/HVAC air filter
Estimated time: 10 minutes or less
Steps
Determine the location of your filter
Your forced air system will be similar, whether or not it is a heating (furnace) or cooling (AC) system – or both. The furnace filter housing/slot is located right next to the heating/cooling system’s air handler or blower. Your filter(s) may also be located in a return grille on the wall or ceiling of your home.
Determine the type/size of filter that you use
Typically, the dimensions or part number of the filter will be printed on the filter frame. Use this information to order a new filter.
Purchase a new air filter from DiscountFilters.com
Visit DiscountFilters.com and purchase a new filter. Use our filter finders to verify the correct match.
Remove the old filter
Turn off the power to the heating/cooling system and remove the old filter from its housing/slot and discard.
Insert the new filter
Pay attention to any airflow direction arrows printed on the frame of the new filter. Install the filter by sliding it into the filter housing/slot with the airflow arrow pointing towards the blower. If installing the filter in a wall or ceiling grille – the airflow arrow should point towards the wall or ceiling. Turn on the power to the forced air system.
Enjoy cleaner air!