Description
The factory original Whirlpool Filter (4396701) is used in refrigerators by Whirlpool, KitchenAid, Jenn-Air and others. The 4396701 filter creates better tasting water for drinking and making beverages as well as clean, clearer, healthy ice.
Features:
- Original OEM product
- Easy installation and operation
- Helps reduce chlorine taste and odor
- Helps reduce contaminants found in tap water and improves its quality
- Tested by NSF International against Standard 42 for the reduction of chlorine taste and odor and particulate
- Tested by NSF International against Standard 53 for the reduction of lead, and other chemicals and impurities
The Whirlpool 4396701 is compatible with the following obsolete or alternate filter part numbers:
- 046-9915
- 09915P
- 2301706
- 4396701
- 4396702
- 4396703
- 4396706
- 46-9915
|
- 4609915000
- 469915
- 6701
- 9915
- 9915P
- EFF-6001A
- L120V
- L200
|
- L200V
- LC200V
- NL120V
- NLC120V
- SGF-W10
- WF-293
- WF-L120V
- WF-L200
|
- WF-L200V
- WF-LC200V
- WF-NL120V
- WF-NLC120V
- WF293
- WFI-NL120V
- WFINL120V
- WFL120V
|
- WFL200
- WFL200V
- WFLC200V
- WFNL120V
- WFNLC120V
|
How To Install The Whirlpool 4396701 Filter:
|
- Remove old filter cartridge by grasping and turning clockwise until the filter is released from the filter head
- Slide the filter cartridge cap onto the end of the new filter cartridge (after removing from old cartridge)
- Insert filter into the compartment in the base grille, pushing until it stops
- Rotate the cap clockwise 1/4 turn until it stops and it is in a horizontal position
- Dispense water through the water dispenser for 2 minutes or until the water become clear. This will activate the system while clearing any trapped air in the water line
- Replace filter every 6 months
|