EWF2CBPA Refrigerator Water Filters

Electrolux Replacement For EWF2CBPA Filter

Electrolux Pure Advantage EWF2CBPA Refrigerator Filter, 3-Pack — 3 pack

Change Every 6 Months
30 - 100 PSI
33 - 100 °F
400 Gallon Capacity
0.5 GPM Flow Rate

$34.58 Per Filter

Case of 3 Filters, $103.75

In Stock
Ships Today

5 stars (6 reviews)

The EWF2CBPA is compatible with the following obsolete or alternate filter part numbers:

How To Install The EWF2CBPA Filter:

Turn off the icemaker using the power switch
Press the filter release button adjacent to the old filter - discard old filter
Push the new filter straight into the filter receiver until you hear a double "click"
Turn the power back on to the icemaker
Reset the change water indicator by referring to instructions in your owners manual
Replace the filter once every 6 months

Refrigerator Water Filter Tip #6:

If your refrigerator does not have a built-in water filter, consider filtering the incoming water line with an inline filter or reverse osmosis system.

The factory original Electrolux EWF2CBPA refrigerator water filter is designed for Electrolux refrigerators with the Pure Advantage Ice and Water Filtration System. It also fits all ICON side-by-side models.

This six-month fridge filter will improve the quality of your tap water while reducing contaminants. It has been tested by NSF International against Standard 42 for the reduction of chlorine taste and odor, as well as against Standard 53 for the reduction of lead, cysts, turbidity and other chemicals and impurities.

The Electrolux EWF2CBPA water filter provides a pressure range of 30 � 100 PSI, a temperature range of 33 � 100 �F, a flow rate of half a gallon per minute and a capacity of 400 gallons.

This Electrolux fridge filter comes in a three pack that will cover your filtration needs for as many as 18 months. Install the filter by simply pushing it into the filter receiver in your icemaker after you turn the power off.