IAQ CMM1124x24x2 | Our#: 178000

24" X 24" X 2" MERV 13 Pleated Filter For Geothermal Systems

IAQ CMM1124x24x2 | Our#: 178000

  •  Fast Shipping & Free Returns
  •  100% Compatibility Guarantee

Protect more sensitive lungs

  • Highest rated filter to reduce most pollutants
  • Reduces pollen, dust, lint, dust mite debris, pet dander & mold spores
  • Lessens odors from car fumes & smoke
  • Removes bacteria & virus carriers
  • Creates cleaner indoor air
  • Actual Dimensions: 23 ½" x 23 ½" x 1 ¾"
24

This product is currently unavailable.
The IAQ CMM1124x24x2 that you're looking for is so popular right now, it is not available at the moment. Enter your email address and we'll keep you updated when it's in stock.

  •  Fast Shipping & Free Returns
  •  100% Compatibility Guarantee
Frequently Purchased Together

Product Details

25" X 25" X 2" MERV 13 Pleated Filter For Geothermal Systems

(actual size 23.75" X 24.5" X 1.75")

Developed specifically to replace the hard-to-find filters for ClimateMaster and other geothermal heating and cooling systems.  Protect your heating and air conditioning equipment and promote excellent indoor air quality with this high-efficiency pleated filter.  These pleated panel filters are engineered for sturdy performance and ease of use and provide an upgrade over standard pleated filters. This specialized MERV 13-rated media captures 90% of particles sized from 1-3 microns, and provides the ultimate filter performance for residential and commercial applications.

Features:
  • Extended-surface pleated filter is engineered to provide higher initial efficiencies and better overall performance than common pleated filters
  • Pleated media means greater filter surface area and high dust holding capacity
  • Highly specialized synthetic media promotes high performance throughout filter lifecycle Low resistance to airflow
  • Moisture-resistant beverage board frame and sturdy support grid for even pleat spacing and structural support
  • MERV 13 rating means the filter attracts common large and small household allergens like dust, pollen, and mold spores as well as smaller particulate like pet dander and very small dust particles
  • Replace every 90 days under normal use
  • Fits WaterFurnace Legend Series. Replaces Part # 59P511-17



How to change your furnace/air-conditioner/HVAC air filter

Estimated time: 10 minutes or less

Steps

  1. Determine the location of your filter

    Your forced air system will be similar, whether or not it is a heating (furnace) or cooling (AC) system – or both. The furnace filter housing/slot is located right next to the heating/cooling system’s air handler or blower. Your filter(s) may also be located in a return grille on the wall or ceiling of your home.

  2. Determine the type/size of filter that you use

    Typically, the dimensions or part number of the filter will be printed on the filter frame. Use this information to order a new filter.

  3. Purchase a new air filter from DiscountFilters.com

    Visit DiscountFilters.com and purchase a new filter. Use our filter finders to verify the correct match.

  4. Remove the old filter

    Turn off the power to the heating/cooling system and remove the old filter from its housing/slot and discard.

  5. Insert the new filter

    Pay attention to any airflow direction arrows printed on the frame of the new filter. Install the filter by sliding it into the filter housing/slot with the airflow arrow pointing towards the blower. If installing the filter in a wall or ceiling grille – the airflow arrow should point towards the wall or ceiling. Turn on the power to the forced air system.

    Enjoy cleaner air!